How to Install? Watch Me!

Tools you will need:

1. Screwdriver

2. Measuring tape

3. Step stool or ladder

4. Pencil

5. Drill

6. 3/32" drill bit to predrill screw holes

7. 1/4" drill bit for wall anchors

Inside Mounting

For installation inside the frame, screw the brackets on each side to the top of the window frame. Then, all you have to do is affix the cassette containing the blind by opposing it with a simple and slight movement from back to front. 

The last step is to screw the tensioners that connect the chain to the zebra blind inside the frame. To do this, simply screw the tensioner to the window frame using the screws.

Outside Mounting

For installation outside the frame, the installation procedure is essentially the same as an inside mount. You have to screw the brackets on the window frame or directly on the wall according to the desired location. 

If installing on the wall, it is recommended to use a level or tape measure in order to ensure that the two brackets are installed at the same height. You must then affix the cassette from back to front on the brackets with a simple and light movement. Finally, the tensioners that connect the chain to the blind must be screwed inside the frame.